CUDA Execution Provider

The CUDA Execution Provider enables hardware accelerated computation on Nvidia CUDA-enabled GPUs.

Install
Requirements
Build
Configuration Options
Performance Tuning
Samples

Install

Pre-built binaries of ONNX Runtime with CUDA EP are published for most language bindings. Please reference Install ORT.

Requirements

Please reference table below for official GPU packages dependencies for the ONNX Runtime inferencing package. Note that ONNX Runtime Training is aligned with PyTorch CUDA versions; refer to the Training tab on onnxruntime.ai for supported versions.

Note: Because of CUDA Minor Version Compatibility, Onnx Runtime built with CUDA 11.4 should be compatible with any CUDA 11.x version. Please reference Nvidia CUDA Minor Version Compatibility.

ONNX Runtime	CUDA	cuDNN	Notes
1.14 1.13.1 1.13	11.6	8.2.4 (Linux) 8.5.0.96 (Windows)	libcudart 11.4.43 libcufft 10.5.2.100 libcurand 10.2.5.120 libcublasLt 11.6.5.2 libcublas 11.6.5.2 libcudnn 8.2.4
1.12 1.11	11.4	8.2.4 (Linux) 8.2.2.26 (Windows)	libcudart 11.4.43 libcufft 10.5.2.100 libcurand 10.2.5.120 libcublasLt 11.6.5.2 libcublas 11.6.5.2 libcudnn 8.2.4
1.10	11.4	8.2.4 (Linux) 8.2.2.26 (Windows)	libcudart 11.4.43 libcufft 10.5.2.100 libcurand 10.2.5.120 libcublasLt 11.6.1.51 libcublas 11.6.1.51 libcudnn 8.2.4
1.9	11.4	8.2.4 (Linux) 8.2.2.26 (Windows)	libcudart 11.4.43 libcufft 10.5.2.100 libcurand 10.2.5.120 libcublasLt 11.6.1.51 libcublas 11.6.1.51 libcudnn 8.2.4
1.8	11.0.3	8.0.4 (Linux) 8.0.2.39 (Windows)	libcudart 11.0.221 libcufft 10.2.1.245 libcurand 10.2.1.245 libcublasLt 11.2.0.252 libcublas 11.2.0.252 libcudnn 8.0.4
1.7	11.0.3	8.0.4 (Linux) 8.0.2.39 (Windows)	libcudart 11.0.221 libcufft 10.2.1.245 libcurand 10.2.1.245 libcublasLt 11.2.0.252 libcublas 11.2.0.252 libcudnn 8.0.4
1.5-1.6	10.2	8.0.3	CUDA 11 can be built from source
1.2-1.4	10.1	7.6.5	Requires cublas10-10.2.1.243; cublas 10.1.x will not work
1.0-1.1	10.0	7.6.4	CUDA versions from 9.1 up to 10.1, and cuDNN versions from 7.1 up to 7.4 should also work with Visual Studio 2017

For older versions, please reference the readme and build pages on the release branch.

Build

For build instructions, please see the BUILD page.

Configuration Options

The CUDA Execution Provider supports the following configuration options.

device_id

The device ID.

Default value: 0

gpu_mem_limit

The size limit of the device memory arena in bytes. This size limit is only for the execution provider’s arena. The total device memory usage may be higher. s: max value of C++ size_t type (effectively unlimited)

arena_extend_strategy

The strategy for extending the device memory arena.

Value	Description
kNextPowerOfTwo (0)	subsequent extensions extend by larger amounts (multiplied by powers of two)
kSameAsRequested (1)	extend by the requested amount

Default value: kNextPowerOfTwo

cudnn_conv_algo_search

The type of search done for cuDNN convolution algorithms.

Value	Description
EXHAUSTIVE (0)	expensive exhaustive benchmarking using cudnnFindConvolutionForwardAlgorithmEx
HEURISTIC (1)	lightweight heuristic based search using cudnnGetConvolutionForwardAlgorithm_v7
DEFAULT (2)	default algorithm using CUDNN_CONVOLUTION_FWD_ALGO_IMPLICIT_PRECOMP_GEMM

Default value: EXHAUSTIVE

do_copy_in_default_stream

Whether to do copies in the default stream or use separate streams. The recommended setting is true. If false, there are race conditions and possibly better performance.

Default value: true

cudnn_conv_use_max_workspace

Check tuning performance for convolution heavy models for details on what this flag does. This flag is only supported from the V2 version of the provider options struct when used using the C API. The V2 provider options struct can be created using this and updated using this. Please take a look at the sample below for an example.

Default value: 1, for versions 1.14 and later 0, for previous versions

cudnn_conv1d_pad_to_nc1d

Check convolution input padding in the CUDA EP for details on what this flag does. This flag is only supported from the V2 version of the provider options struct when used using the C API. The V2 provider options struct can be created using this and updated using this. Please take a look at the sample below for an example.

Default value: 0

enable_cuda_graph

Check using CUDA Graphs in the CUDA EP for details on what this flag does. This flag is only supported from the V2 version of the provider options struct when used using the C API. The V2 provider options struct can be created using this and updated using this.

Default value: 0

enable_skip_layer_norm_strict_mode

Whether to use strict mode in SkipLayerNormalization cuda implementation. The default and recommanded setting is false. If enabled, accuracy improvement and performance drop can be expected. This flag is only supported from the V2 version of the provider options struct when used using the C API. The V2 provider options struct can be created using this and updated using this.

Default value: 0

Performance Tuning

The I/O Binding feature should be utilized to avoid overhead resulting from copies on inputs and outputs.

Convolution-heavy models

ORT leverages CuDNN for convolution operations and the first step in this process is to determine which “optimal” convolution algorithm to use while performing the convolution operation for the given input configuration (input shape, filter shape, etc.) in each Conv node. This sub-step involves querying CuDNN for a “workspace” memory size and have this allocated so that CuDNN can use this auxiliary memory while determining the “optimal” convolution algorithm to use.

The default value of cudnn_conv_use_max_workspace is 1 for versions 1.14 or later, and 0 for previous versions. When its value is 0, ORT clamps the workspace size to 32 MB which may lead to a sub-optimal convolution algorithm getting picked by CuDNN. To allow ORT to allocate the maximum possible workspace as determined by CuDNN, a provider option named cudnn_conv_use_max_workspace needs to get set (as shown below).

Keep in mind that using this flag may increase the peak memory usage by a factor (sometimes a few GBs) but this does help CuDNN pick the best convolution algorithm for the given input. We have found that this is an important flag to use while using an fp16 model as this allows CuDNN to pick tensor core algorithms for the convolution operations (if the hardware supports tensor core operations). This flag may or may not result in performance gains for other data types (float and double).

Python

  providers = [("CUDAExecutionProvider", {"cudnn_conv_use_max_workspace": '1'})]
  sess_options = ort.SessionOptions()
  sess = ort.InferenceSession("my_conv_heavy_fp16_model.onnx", sess_options=sess_options, providers=providers)

C/C++

  OrtCUDAProviderOptionsV2* cuda_options = nullptr;
  CreateCUDAProviderOptions(&cuda_options);

  std::vector<const char*> keys{"cudnn_conv_use_max_workspace"};
  std::vector<const char*> values{"1"};

  UpdateCUDAProviderOptions(cuda_options, keys.data(), values.data(), 1);

  OrtSessionOptions* session_options = /* ... */;
  SessionOptionsAppendExecutionProvider_CUDA_V2(session_options, cuda_options);

  // Finally, don't forget to release the provider options
  ReleaseCUDAProviderOptions(cuda_options);

 var cudaProviderOptions = new OrtCUDAProviderOptions(); // Dispose this finally

 var providerOptionsDict = new Dictionary<string, string>();
 providerOptionsDict["cudnn_conv_use_max_workspace"] = "1";

 cudaProviderOptions.UpdateOptions(providerOptionsDict);

 SessionOptions options = SessionOptions.MakeSessionOptionWithCudaProvider(cudaProviderOptions);  // Dispose this finally

Convolution Input Padding

ORT leverages CuDNN for convolution operations. While CuDNN only takes 4-D or 5-D tensor as input for convolution operations, dimension padding is needed if the input is 3-D tensor. Given an input tensor of shape [N, C, D], it can be padded to [N, C, D, 1] or [N, C, 1, D]. While both of these two padding ways produce same output, the performance may be a lot different because different convolution algorithms are selected, especially on some devices such as A100. By default the input is padded to [N, C, D, 1]. A provider option named cudnn_conv1d_pad_to_nc1d needs to get set (as shown below) if [N, C, 1, D] is preferred.

Python

  providers = [("CUDAExecutionProvider", {"cudnn_conv1d_pad_to_nc1d": '1'})]
  sess_options = ort.SessionOptions()
  sess = ort.InferenceSession("my_conv_model.onnx", sess_options=sess_options, providers=providers)

C/C++

  OrtCUDAProviderOptionsV2* cuda_options = nullptr;
  CreateCUDAProviderOptions(&cuda_options);

  std::vector<const char*> keys{"cudnn_conv1d_pad_to_nc1d"};
  std::vector<const char*> values{"1"};

  UpdateCUDAProviderOptions(cuda_options, keys.data(), values.data(), 1);

  OrtSessionOptions* session_options = /* ... */;
  SessionOptionsAppendExecutionProvider_CUDA_V2(session_options, cuda_options);

  // Finally, don't forget to release the provider options
  ReleaseCUDAProviderOptions(cuda_options);

  var cudaProviderOptions = new OrtCUDAProviderOptions(); // Dispose this finally

  var providerOptionsDict = new Dictionary<string, string>();
  providerOptionsDict["cudnn_conv1d_pad_to_nc1d"] = "1";

  cudaProviderOptions.UpdateOptions(providerOptionsDict);

  SessionOptions options = SessionOptions.MakeSessionOptionWithCudaProvider(cudaProviderOptions);  // Dispose this finally

Using CUDA Graphs (Preview)

While using the CUDA EP, ORT supports the usage of CUDA Graphs to remove CPU overhead associated with launching CUDA kernels sequentially. To enable the usage of CUDA Graphs, use the provider option as shown in the samples below. Currently, there are some constraints with regards to using the CUDA Graphs feature:

Models with control-flow ops (i.e. If, Loop and Scan ops) are not supported.
Usage of CUDA Graphs is limited to models where-in all the model ops (graph nodes) can be partitioned to the CUDA EP.
The input/output types of models need to be tensors.
Shapes of inputs/outputs cannot change across inference calls. Dynamic shape models are supported - the only constraint is that the input/output shapes should be the same across all inference calls.
By design, CUDA Graphs is designed to read from/write to the same CUDA virtual memory addresses during the graph replaying step as it does during the graph capturing step. Due to this requirement, usage of this feature requires using IOBinding so as to bind memory which will be used as input(s)/output(s) for the CUDA Graph machinery to read from/write to (please see samples below).
While updating the input(s) for subsequent inference calls, the fresh input(s) need to be copied over to the corresponding CUDA memory location(s) of the bound OrtValue input(s) (please see samples below to see how this can be achieved). This is due to the fact that the “graph replay” will require reading inputs from the same CUDA virtual memory addresses.
Multi-threaded usage is currently not supported, i.e. Run() MAY NOT be invoked on the same InferenceSession object from multiple threads while using CUDA Graphs.

NOTE: The very first Run() performs a variety of tasks under the hood like making CUDA memory allocations, capturing the CUDA graph for the model, and then performing a graph replay to ensure that the graph runs. Due to this, the latency associated with the first Run() is bound to be high. Subsequent Run()s only perform graph replays of the graph captured and cached in the first Run().

Python

  providers = [("CUDAExecutionProvider", {"enable_cuda_graph": '1'})]
  sess_options = ort.SessionOptions()
  sess = ort.InferenceSession("my_model.onnx", sess_options=sess_options, providers=providers)

  providers = [("CUDAExecutionProvider", {'enable_cuda_graph': True})]
  x = np.array([[1.0, 2.0], [3.0, 4.0], [5.0, 6.0]], dtype=np.float32)
  y = np.array([[0.0], [0.0], [0.0]], dtype=np.float32)
  x_ortvalue = onnxrt.OrtValue.ortvalue_from_numpy(x, 'cuda', 0)
  y_ortvalue = onnxrt.OrtValue.ortvalue_from_numpy(y, 'cuda', 0)

  session = onnxrt.InferenceSession("matmul_2.onnx", providers=providers)
  io_binding = session.io_binding()

  # Bind the input and output
  io_binding.bind_ortvalue_input('X', x_ortvalue)
  io_binding.bind_ortvalue_output('Y', y_ortvalue)

  # One regular run for the necessary memory allocation and cuda graph capturing
  session.run_with_iobinding(io_binding)
  expected_y = np.array([[5.0], [11.0], [17.0]], dtype=np.float32)
  np.testing.assert_allclose(expected_y, y_ortvalue.numpy(), rtol=1e-05, atol=1e-05)

  # After capturing, CUDA graph replay happens from this Run onwards
  session.run_with_iobinding(io_binding)
  np.testing.assert_allclose(expected_y, y_ortvalue.numpy(), rtol=1e-05, atol=1e-05)

  # Update input and then replay CUDA graph with the updated input
  x_ortvalue.update_inplace(np.array([[10.0, 20.0], [30.0, 40.0], [50.0, 60.0]], dtype=np.float32))
  session.run_with_iobinding(io_binding)

C/C++

  const auto& api = Ort::GetApi();

  struct CudaMemoryDeleter {
  explicit CudaMemoryDeleter(const Ort::Allocator* alloc) {
      alloc_ = alloc;
  }

  void operator()(void* ptr) const {
      alloc_->Free(ptr);
  }
    
  const Ort::Allocator* alloc_;
  };
    
  // Enable cuda graph in cuda provider option.
  OrtCUDAProviderOptionsV2* cuda_options = nullptr;
  api.CreateCUDAProviderOptions(&cuda_options);
  std::unique_ptr<OrtCUDAProviderOptionsV2, decltype(api.ReleaseCUDAProviderOptions)> rel_cuda_options(cuda_options, api.ReleaseCUDAProviderOptions);
  std::vector<const char*> keys{"enable_cuda_graph"};
  std::vector<const char*> values{"1"};
  api.UpdateCUDAProviderOptions(rel_cuda_options.get(), keys.data(), values.data(), 1);

  Ort::SessionOptions session_options;
  api.SessionOptionsAppendExecutionProvider_CUDA_V2(static_cast<OrtSessionOptions*>(session_options), rel_cuda_options.get();


  // Create IO bound inputs and outputs.
  Ort::Session session(*ort_env, ORT_TSTR("matmul_2.onnx"), session_options);
  Ort::MemoryInfo info_cuda("Cuda", OrtAllocatorType::OrtArenaAllocator, 0, OrtMemTypeDefault);
  Ort::Allocator cuda_allocator(session, info_cuda);

  const std::array<int64_t, 2> x_shape = {3, 2};
  std::array<float, 3 * 2> x_values = {1.0f, 2.0f, 3.0f, 4.0f, 5.0f, 6.0f};
  auto input_data = std::unique_ptr<void, CudaMemoryDeleter>(cuda_allocator.Alloc(x_values.size() * sizeof(float)),
                                                          CudaMemoryDeleter(&cuda_allocator));
  cudaMemcpy(input_data.get(), x_values.data(), sizeof(float) * x_values.size(), cudaMemcpyHostToDevice);

  // Create an OrtValue tensor backed by data on CUDA memory
  Ort::Value bound_x = Ort::Value::CreateTensor(info_cuda, reinterpret_cast<float*>(input_data.get()), x_values.size(),
                                              x_shape.data(), x_shape.size());

  const std::array<int64_t, 2> expected_y_shape = {3, 2};
  std::array<float, 3 * 2> expected_y = {1.0f, 4.0f, 9.0f, 16.0f, 25.0f, 36.0f};
  auto output_data = std::unique_ptr<void, CudaMemoryDeleter>(cuda_allocator.Alloc(expected_y.size() * sizeof(float)),
                                                              CudaMemoryDeleter(&cuda_allocator));

  // Create an OrtValue tensor backed by data on CUDA memory
  Ort::Value bound_y = Ort::Value::CreateTensor(info_cuda, reinterpret_cast<float*>(output_data.get()),
                                              expected_y.size(), expected_y_shape.data(), expected_y_shape.size());

  Ort::IoBinding binding(session);
  binding.BindInput("X", bound_x);
  binding.BindOutput("Y", bound_y);

  // One regular run for necessary memory allocation and graph capturing
  session.Run(Ort::RunOptions(), binding);

  // After capturing, CUDA graph replay happens from this Run onwards
  session.Run(Ort::RunOptions(), binding);

  // Update input and then replay CUDA graph with the updated input
  x_values = {10.0f, 20.0f, 30.0f, 40.0f, 50.0f, 60.0f};
  cudaMemcpy(input_data.get(), x_values.data(), sizeof(float) * x_values.size(), cudaMemcpyHostToDevice);
  session.Run(Ort::RunOptions(), binding);

C# (future)

Samples

Python

import onnxruntime as ort

model_path = '<path to model>'

providers = [
    ('CUDAExecutionProvider', {
        'device_id': 0,
        'arena_extend_strategy': 'kNextPowerOfTwo',
        'gpu_mem_limit': 2 * 1024 * 1024 * 1024,
        'cudnn_conv_algo_search': 'EXHAUSTIVE',
        'do_copy_in_default_stream': True,
    }),
    'CPUExecutionProvider',
]

session = ort.InferenceSession(model_path, providers=providers)

C/C++

Using legacy provider options struct

OrtSessionOptions* session_options = /* ... */;

OrtCUDAProviderOptions options;
options.device_id = 0;
options.arena_extend_strategy = 0;
options.gpu_mem_limit = 2 * 1024 * 1024 * 1024;
options.cudnn_conv_algo_search = OrtCudnnConvAlgoSearchExhaustive;
options.do_copy_in_default_stream = 1;

SessionOptionsAppendExecutionProvider_CUDA(session_options, &options);

Using V2 provider options struct

OrtCUDAProviderOptionsV2* cuda_options = nullptr;
CreateCUDAProviderOptions(&cuda_options);

std::vector<const char*> keys{"device_id", "gpu_mem_limit", "arena_extend_strategy", "cudnn_conv_algo_search", "do_copy_in_default_stream", "cudnn_conv_use_max_workspace", "cudnn_conv1d_pad_to_nc1d"};
std::vector<const char*> values{"0", "2147483648", "kSameAsRequested", "DEFAULT", "1", "1", "1"};

UpdateCUDAProviderOptions(cuda_options, keys.data(), values.data(), keys.size());

OrtSessionOptions* session_options = /* ... */;
SessionOptionsAppendExecutionProvider_CUDA_V2(session_options, cuda_options);

// Finally, don't forget to release the provider options
ReleaseCUDAProviderOptions(cuda_options);

C#

var cudaProviderOptions = new OrtCUDAProviderOptions(); // Dispose this finally

var providerOptionsDict = new Dictionary<string, string>();
providerOptionsDict["device_id"] = "0";
providerOptionsDict["gpu_mem_limit"] = "2147483648";
providerOptionsDict["arena_extend_strategy"] = "kSameAsRequested";
providerOptionsDict["cudnn_conv_algo_search"] = "DEFAULT";
providerOptionsDict["do_copy_in_default_stream"] = "1";
providerOptionsDict["cudnn_conv_use_max_workspace"] = "1";
providerOptionsDict["cudnn_conv1d_pad_to_nc1d"] = "1";

cudaProviderOptions.UpdateOptions(providerOptionsDict);

SessionOptions options = SessionOptions.MakeSessionOptionWithCudaProvider(cudaProviderOptions);  // Dispose this finally

Also see the tutorial here on how to configure CUDA for C# on Windows.

Java

OrtCUDAProviderOptions cudaProviderOptions = new OrtCUDAProviderOptions(/*device id*/0); // Must be closed after the session closes

cudaProviderOptions.add("gpu_mem_limit","2147483648");
cudaProviderOptions.add("arena_extend_strategy","kSameAsRequested");
cudaProviderOptions.add("cudnn_conv_algo_search","DEFAULT");
cudaProviderOptions.add("do_copy_in_default_stream","1");
cudaProviderOptions.add("cudnn_conv_use_max_workspace","1");
cudaProviderOptions.add("cudnn_conv1d_pad_to_nc1d","1");

OrtSession.SessionOptions options = new OrtSession.SessionOptions(); // Must be closed after the session closes
options.addCUDA(cudaProviderOptions);

CUDA Execution Provider

Contents

Install

Requirements

Build

Configuration Options

device_id

gpu_mem_limit

arena_extend_strategy

cudnn_conv_algo_search

do_copy_in_default_stream

cudnn_conv_use_max_workspace

cudnn_conv1d_pad_to_nc1d

enable_cuda_graph

enable_skip_layer_norm_strict_mode

Performance Tuning

Convolution-heavy models

Convolution Input Padding

Using CUDA Graphs (Preview)

Samples

Python

C/C++

Using legacy provider options struct

Using V2 provider options struct

C#

Java